|
Fenochem 52 KS7
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
An aqueous solution of a resole-type phenol-formaldehyde condensate polymer made using a potassium hydroxide catalyst. This is a low viscosity liquid, reddish brown in colour and free of any mechanical impurities.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content (135°C, 1 h, 3 g)
|
WT%
|
min. 50
|
|
Free formaldehyde content
|
WT%
|
5 - 7
|
|
Free phenol content
|
WT%
|
0.5 - 1
|
|
Nitrogen content (N2)
|
WT%
|
max 7.5
|
|
Miscibility with water (10 g per 250 ml)
|
-
|
1 : 25
|
|
B-time (130 °C)
|
minutes
|
3-7
|
|
pH at 20°C
|
|
9 – 10
|
|
Density (20 °C)
|
kg/m3
|
1200 ± 20
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement.
|
|
USES
|
|
This resin is intended for use to bond mineral and glass fibres with the application of heat in the production of sound and thermal insulation materials.
|
|
PACKAGING
|
|
The product is filled directly into insulated road or rail tankers.
|
|
TRANSPORT
|
|
Road and rail transport.
|
|
STORAGE
|
|
Store in well-sealed steel tanks at a temperature of 20-27°C.
Keep the tanks out of direct sunlight and away from sources of heat. Storage temperatures must be kept at 20-27°C to ensure product durability, which is verified through miscibility of the resin with water. Product durability at the customer’s site is 14 days if the recommended storage conditions are followed.
|
Fenokol 43 EXF
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
Alkaline aqueous solution of a resole-type phenol-formaldehyde condensate polymer with a modifying agent to adjust dry matter. This is a viscous liquid, reddish brown in colour and free of mechanical impurities with limited miscibility with water. Viscosity increases during storage as a result of the on-going reaction between phenol and formaldehyde products.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content
|
WT%
|
min. 45
|
|
Ford consistency (20°C, 4 mm)
|
s
|
40 - 180
|
|
Dynamic viscosity at 20°C
|
mPa.s
|
240 -1080
|
|
Free formaldehyde content
|
WT%
|
max. 0.1
|
|
Free phenol content
|
WT%
|
max. 0.1
|
|
Alkali content
|
WT%
|
max. 5
|
|
Density at 20°C
|
kg/m3
|
1210 ± 20
|
|
pH at 20°C
|
|
10 - 12
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement
|
|
USES
|
|
This resin is intended for use as an adhesive in water-resistant plywood products and other materials layered under pressure and heat.
|
|
PACKAGING
|
|
The product is filled directly into insulated road or rail tankers.
|
|
TRANSPORT
|
|
Road and rail transport.
|
|
STORAGE
|
|
Store in well-sealed steel tanks at a temperature of up to 20°C.
Keep the tanks out of direct sunlight and away from sources of heat to ensure they do not harden. Comply with the recommended storage temperature to ensure product durability. Product durability at the customer’s site is 30 days at 20 °C.
|
|
|
|
Fenokol 43 EXV
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
Alkaline aqueous solution of a resole-type phenol-formaldehyde condensate polymer with a modifying agent to adjust dry matter. This is a viscous liquid, reddish brown in colour and free of mechanical impurities with limited miscibility with water. Viscosity increases during storage as a result of the on-going reaction between phenol and formaldehyde products.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content
|
WT%
|
46 - 52
|
|
Ford consistency (20°C, 4 mm)
|
s
|
20 - 40
|
|
Dynamic viscosity at 20°C
|
mPa.s
|
120 - 240
|
|
Free formaldehyde content
|
WT%
|
max. 0.05
|
|
Free phenol content
|
WT%
|
max. 0.05
|
|
Alkali content
|
WT%
|
max. 8
|
|
Density at 20°C
|
kg/m3
|
1205 ± 20
|
|
pH at 20°C
|
|
11 - 12
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement.
|
|
USES
|
|
This resin is used as a bonder in the production of hardboard.
|
|
PACKAGING
|
|
The product is filled directly into insulated road or rail tankers.
|
|
TRANSPORT
|
|
Road and rail transport.
|
|
STORAGE
|
|
|
Store in well-sealed steel tanks at a temperature of up to 20°C. Keep the tanks out of direct sunlight and away from sources of heat to ensure they do not harden. Comply with the recommended storage temperature to ensure product durability. Product durability at the customer’s site is 30 days at 20 °C.
Fenokol 48 EXF
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
Alkaline aqueous solution of a resole-type phenol-formaldehyde condensate polymer with a modifying agent to adjust dry matter. This is a viscous liquid, reddish brown in colour and free of mechanical impurities with limited miscibility with water. Viscosity increases during storage as a result of the on-going reaction between phenol and formaldehyde products.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content
|
WT%
|
min. 48
|
|
Ford consistency (20°C, 4 mm)
|
s
|
40 - 180
|
|
Dynamic viscosity at 20°C
|
mPa.s
|
240 -1080
|
|
Free formaldehyde content
|
WT%
|
max. 0.1
|
|
Free phenol content
|
WT%
|
max. 0.1
|
|
Alkali content
|
WT%
|
max. 5
|
|
Density at 20°C
|
kg/m3
|
1210 ± 20
|
|
pH at 20°C
|
|
10 - 12
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement.
|
|
USES
|
|
This resin is intended for use as an adhesive in water-resistant plywood products and other materials layered under pressure and heat.
|
|
PACKAGING
|
|
The product is filled directly into insulated road or rail tankers.
|
|
TRANSPORT
|
|
Road and rail transport.
|
|
STORAGE
|
|
Store in well-sealed steel tanks at a temperature of up to 20°C.
Keep the tanks out of direct sunlight and away from sources of heat to ensure they do not harden. Comply with the recommended storage temperature to ensure product durability. Product durability at the customer’s site is 30 days at 20 °C.
|
Novokol G
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
Novolac-type phenol-formaldehyde condensate polymer resin in solvent. It is produced through the polymer condensation of phenol and formaldehyde in an acidic environment. This is a high viscosity liquid, reddish brown in colour and free of any mechanical impurities. Monoethylene glycol and ethyl alcohol in a concentration per the customer’s specifications is used as the solvent.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content
|
WT%
|
min. 65
|
|
Water content
|
WT%
|
max 3.5
|
|
Ford consistency (20°C, 4 mm)
|
s
|
300 - 1000
|
|
Free formaldehyde content
|
WT%
|
max. 0.1
|
|
Free phenol content
|
WT%
|
max. 1.8
|
|
Bulk density
|
kg/m3
|
1100 -1200
|
|
Monoethylene glycol content
|
WT%
|
max. 20
|
|
Ethyl alcohol content
|
WT%
|
max. 17
|
|
pH
|
|
4 - 5
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement.
|
|
USES
|
|
This resin is used as a bonder in the manufacturing of refractory building materials - Refractories group of applications. For the manufacture of carbonaceous materials and for the production of protective coatings for exterior use only.
|
|
PACKAGING
|
|
750 l metal containers, or 1000 l IBC containers, 200 l drums
|
|
TRANSPORT
|
|
Road transport.
|
|
STORAGE
|
|
Store Novokol G in closed containers and drums in dry areas at temperatures up to 25°C, avoid exposure to heat, direct sunlight and open flames. Resin durability is up to 6 months from the date of production under the specified conditions.
|
|
|
|
Novokol GG
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
Novolac-type phenol-formaldehyde condensate polymer resin in solvent. It is produced through the polymer condensation of phenol and formaldehyde in an acidic environment. This is a high viscosity liquid, reddish brown in colour and free of any mechanical impurities. Monoethylene glycol and ethyl alcohol in a concentration per the customer’s specifications is used as the solvent.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content (135°C, 1 h, 3 g)
|
WT%
|
min. 64
|
|
Water content
|
WT%
|
max 3.0
|
|
Dynamic viscosity at 25°C
|
mPas
|
5000 - 11000
|
|
Free formaldehyde content
|
WT%
|
max. 0.1
|
|
Free phenol content
|
WT%
|
max. 2.0
|
|
Ethanol content
|
WT%
|
max. 10
|
|
Monoethylene glycol content
|
WT%
|
max. 35
|
|
pH
|
|
4 - 6
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement.
|
|
USES
|
|
This resin is used as a bonder in the manufacturing of refractory sealing materials.
used to seal the tapping openings in blast furnaces - Refractories group of applications.
|
|
PACKAGING
|
|
1000 l IBC containers, 200 l drums.
|
|
TRANSPORT
|
|
Road transport.
|
|
STORAGE
|
|
Store Novokol GG in closed containers and drums in dry areas at temperatures up to 25°C, avoid exposure to heat, direct sunlight and open flames. Resin durability is up to 6 months from the date of production under the specified conditions.
|
|
|
|
Ethanol-free Novokol GG
|
COMPOSITION, APPEARANCE AND PROPERTIES
|
|
Novolac-type phenol-formaldehyde condensate polymer resin in solvent. It is produced through the polymer condensation of phenol and formaldehyde in an acidic environment. This is a high viscosity liquid, reddish brown in colour and free of any mechanical impurities. Monoethylene glycol in a concentration per the customer’s specifications is used as the solvent.
|
|
QUALITY SPECIFICATIONS
|
|
Quality indicator
|
Unit
|
Value
|
|
Dry matter content (135°C, 1 h, 3 g)
|
WT%
|
min. 60
|
|
Water content
|
WT%
|
max 3.0
|
|
Dynamic viscosity at 25°C
|
mPas
|
5000 - 11000
|
|
Free formaldehyde content
|
WT%
|
max. 0.1
|
|
Free phenol content
|
WT%
|
max. 2.0
|
|
Ethanol content
|
WT%
|
0
|
|
Monoethylene glycol content
|
WT%
|
max. 45
|
|
pH
|
|
4 - 6
|
|
|
Binding quality specifications and methods of determination are defined in a contractual arrangement.
|
|
USES
|
|
This resin is used as a bonder in the manufacturing of refractory sealing materials used to seal the tapping openings in blast furnaces - refractories group of applications.
|
|
PACKAGING
|
|
1000 l IBC containers, 200 l drums.
|
|
TRANSPORT
|
|
Road transport.
|
|
STORAGE
|
|
Store Novokol GG in closed containers and drums in dry areas at temperatures up to 25°C, avoid exposure to heat, direct sunlight and open flames. Resin durability is up to 6 months from the date of production under the specified conditions.
|
|
|
|
|
